News

Pay attention : Please make sure that the home power main switch is turned off and all circuits are disconnected before wiring; if you cannot confirm that the power has been cut off, please be sure to wear insulated gloves before wiring to avoid the risk of electric shock.

Planning & preparation Bear in mind that different socket designs may have different fitting requirements, so be sure to always check the manufacturer's instructions Sockets are available in a range of sizes, colours and finishes, with some more modern designs also featuring USB ports and Wi-Fi extenders Electrical installations and alterations are subject to local building and electrical regulations that you must comply with. Wiring should always comply with IEE Wiring Regulations If you have any doubts or queries, then it’s best to contact a registered electrician

Switch installation place should better locates on the wall for 1.4m from the floor, and 0.2m from door gate · Socket installation place is dependent on different enviroement: Living room: 30cm from the floor Kitchen/Restroom:1.4m from the floor Air conditioning socket: 1.8m from the floor · The distance between socket and power cable should be more than 50cm · Advise to use water-proof plug, socket in rest room. · Advise light switch for rest room to install outside the rest room to avoid water get into the switch to affect life time or cause accident. If you're unsure about working with electricity, you should call a licensed electrician to do the work. But if you're ready to give it a try, let's go ahead and get started.

The selection of the switch is specific to the switch itself. The selection of the switch mainly has the following aspects:

What brand of switch is good? The choice of switch material is the most important. In fact, for this product, no matter what brand you choose, the most important thing is to pass the quality, whether the switch material is insulated, whether the hardness is up to the standard, whether it has good thermal insulation, etc., are all to judge the quality of the switch Standard. Because for the switch, it must not only have good hardness and toughness, but also have good insulation and heat insulation.

When the house is decorated, there are dozens of wall switches and sockets to be used. it will not take long for the inferior wall switches to start a fire, which will bring hidden dangers to our lives.